Vorshlag 2011 Mustang 5.0 GT - track/autocross/street Project

[Fair]

more from above




On Monday I brought the car to the shop to weigh it, but with a full tank of fuel it was still a few pounds heavier than the 2011 GT was (with no fuel). I have calculated the low-fuel weight to be about 60 pounds lighter than the '11, stock for stock, both without the trunk junk. The 18" skinny spare in the 2013 is pretty slick and if we can find another it will make for a great drag race set of front runners (no "temporary use" or slow max speed listed). For those of you asking, I doubt this will fit over the 14" brakes, but we can try it. When I get a free moment, I will do an all-new thread on the 2013 GT ESP build and share even more. We've already begun ripping and tearing...

Whiteline S197 Parts Now Available

The North American Sales Manager for Whiteline USA, Reid Yoken, came by Vorshlag yesterday. He is in town for the Global Time Attack event this weekend and of course is stopping by to check up with all of his Whiteline dealers. He ended up staying for two hours and we discussed all sorts of new products coming for the S197 Mustang, the BRZ/FR-S, Subarus, BMWs, Miatas, and more. He promised to send us a few more new/pre-production parts for our Mustang and also our BRZ build, which was unexpected, but very cool.



Earlier this week the pricing was published for the new Whiteline Watts Link kit, which we have listed on our website now. Unlike some drop ship/resale operations that listed this and every other part known to man, we have actually used this Whiteline kit and know all of the tricks and tips for installation, tuning and use. We also stock some of their other S197 parts, like the Whiteline Panhard Bar kit (with the optional support brace) and some of their bushings. These Watts Link kits, Whiteline sway bars, and additional parts are available now. We will have another whole batch of S197 Whiteline parts coming for our 2013 GT soon.


Whiteline S197 Watts Link kit shown above, now available from Vorshlag

Our $899 price on the Watts Link kit's ($999 MSRP) is very reasonable considering all of the custom parts it comes with - a gorgeous cast aluminum differential cover with integral bearing loading studs, the bracket for the Watts "Football" mount, the cover's inlet/outlet ports for a differential cooler, and the various arms, brackets and hardware needed to mount all of this. It also comes with a unique cross-chassis brace, which is an optional piece on most PHB kits.


The OEM parts removed and replaced with the Watts Links kit installed.

We had Whiteline send us the production weight for their S197 Watts Link kit: "The entire Watts Link kit is 29 lbs, which includes 8.4 lbs from the differential cover and the associated hardware." Some of that weight is a wash, as you are removing a stock (or aftermarket) PHB, the stock cross-chassis brace (which is replaced in the Whiteline kit), and swapping the stock steel differential cover for their cast aluminum piece. We just weighed all of these stock parts we pulled off when installing the Watts on our 2011 and it all came in at 13.3 pounds. So in the end there's only a net ~15.7 pound increase for this Whiteline Watts Link kit. Not bad at all. In our upcoming 2013 GT purpose-built ESP build we will verify this to the tenth of a pound... and maybe look for ways to pull some weight out of the off-the-shelf Whiteline Watts kit, for those fanatics like us looking to save every ounce.

I discussed this on another forum earlier this week, but I want to make sure people who are racing the S197 realize how complete and high quality this Watts Link kit is. It works GREAT on a street car as well, without the banging and clanging of rod ends to drive you nuts. I will ask them if they want to make a rod end version, but if not we might modify their existing kit with rod ends for dedicated race car builds - we have already been asked. This always adds noise and new wear items, of course. Unprotected metal rod ends that are in high exposure areas are subjected to lots of salt, grime and road debris spray and should be given lots of thought before being installed on a street car.


Left: OEM rear sway bar routing ends very close to the rear tire. Right: Whiteline sway bar runs opposite of stock routing and has 6"+ to tire face (click to enlarge).

Another thing S197 racers should remember is that the Whiteline "axle mount" rear sway bar frees up a lot of inboard room for wider wheels and tires. This is unique to the S197 sway bar aftermarket and is one that cannot be overlooked. If you want to run more than a 10" rear wheel without cutting the fenders, you are going to need the Whiteline rear sway bar. Sure, you can buy it from us (we would appreciate it!), but whoever your Whiteline dealer is, this bar is the way to go for more tire room. Drag racers looking to run 15" or 16" diameter wheels can also look to this unique Whiteline sway bar style for the room they need to fit these smaller wheels. So much win!

last bit below...

[Fair]

final piece...

Hankook Arrive & Drive



On Monday, the regional representative for Hankook Tires asked if I could come to their latest Arrive and Drive event (thanks Fabien!), which was about 30 miles from our shop. Any chance to thrash on somebody's cars and test new tires is always better than anything else I can think of on a regular work day, so I was in. Brandon went with me and shot some pictures of various attendees driving Hankook's Audi A3 and 2012 Mustang GT on Hankook tires. Super tight autocross course, no timers, just for fun.



Hankook always puts on a good show and if you can swing an invite, by all means check one of these events out. We took some autocross runs, had fun, snagged some Hankook swag, and headed back to the shop. I'm a big fan of the Hankook RS-3 tire, which is one of the fastest 140 treadwear tires around. Great for track use and autocrossers in the Street Touring class love them as well. The new 180 treadwear minimum in the SCCA "Road Tire" category will keep them out of there, at least until they can make a 180 TW replacement. We will see if that happens. I will also ask them about making some "big Mustang" R-S3 sizes - something like a 305/35/18 or 315/35/18 would be ideal on a 11" or 12" wide wheel. But for a more rational 10" wheel, Hankook is one of the few companies that does make a 285/35/18 size in the R-S3; this is a perfect fit with our 18x10" S197 D-Force/Vorshlag wheels.

SCCA Jackets for Class Winners

As I mentioned in my last update, Vorshlag teamed up with Solo Performance Specialties to sponsor the Women of Solo Luncheon this year, which was a big success. Dave made the commemorative embroidered polo shirts for all attendees, with the Vorshlag logo on the sleeve, and the ladies really liked them. Dave also runs SCCAgear.com, which makes various shirts/clothing/National Champion jackets for the SCCA.

Dave saw me complaining about the new three entrant minimum rule for crowning National Champions in my last Mustang thread post here, and he knew that I've pointed out in the past the lengthy process some new classes take to become recognized as a class at Nationals. So earlier this week he asked me to "put my money where my mouth is"... and I jumped at the chance.

SPS and Vorshlag have teamed up to provide a run of "SCCA Nationals Class Winner" jackets free of charge to all 2012 Solo Nationals winners who didn't get a National Championship jacket. They paid the same money, but only got half the swag. The recipients will include the winners in any of the unrecognized/provisional classes like "Road Tire" as well as some Ladies class winners who had fewer than three entrants. We made this press release together and will contact these Class Winners about their jackets in the coming weeks (Dave will make these jackets with the same look and at the same time as the National Champion jackets).

I know minimum entrant numbers and provisional classing is a complex subject with a lot of good points one way or another and there is no magic answer. We just felt like recognizing these winners with a little something extra this year, since the 2012 Solo Nationals was the first time the new attendance rule kicked in. Anyone that won can opt out of the free jacket, of course.

GTA Event Prep

I finally remembered what I forgot to post in my pre-Nationals post. The steering shudder is completely and utterly gone now, thanks to this one little swap!



For one "easy" payment of $999, our electric steering rack issues are a thing of the past. It is simply a stock rack that has been reprogrammed to turn off all of the auto-nibble-correction silliness. No other way to get this new programming other than to buy the new FRPP rack, unfortunately (we tried). Well, it does come on a Boss 302-S. I recommend this FRPP rack to any 2011-2013 Mustang driver that is experiencing this steering shudder like what I have documented in the videos from our 2011 GT. If you are experiencing these issues, you can try to take it to your dealership for reproduction and hopeful replacement, but we didn't have much luck there... Here's a tip: the biggest common variable on cars with this shudder is an aftermarket front Lower Control Arm bushing. Change the bushings and be prepared for the shudder.



Other preparation for this weekend includes: new Kumho V710s, upped the spring rates to 550F/250R, added a new set of Porterfield R4 pads and new rotors all the way around (the last track set of rotors and pads were well and truly thrashed). The guys also reinstalled the front brake ducting for use at the GTA event.





What's Next?

We are loading the 2011 Mustang into our trailer now for the tow out to Texas Motor Speedway on Friday and Saturday for the Global Time Attack event. There will also be some XTC drift event running on the same course (separate heats, thankfully!) and the whole "Hot Import Nights" show/circus/scene going on. We are told to expect a big crowd for all of that and they will be doing a live webcast on the GTA website.

Sunday we are loading up and heading to the Dallas Dragway in Crandall, TX. This is the new, preferred autocross site that the Texas Region SCCA is using for Solo events. We can't wait carve some corners and dodge cones at this new concrete site. I will post a new update next week in this thread about the event.

Also, I will start a whole new thread on our 2013 Mustang GT ESP build. Why a second thread? Well... we discussed it and the 2013 build will be a lot different from this 2011 build. The 2011 was a real test mule for us and we ran it in a variety of events and classes, from NASA TTB to TTS, and SCCA STX to ESP, as well as street driving and the Optima Challenge and more. I like the fact that the 2011 can do a little bit of everything pretty well, but I want to WIN the ESP class next year. That will take a completely different build, a different mindset, and a different car. It is also not really a "test mule" type of build, so it will get its own build thread.

What else... NASA has a race weekend at ECR on October 6-7th, where we will run the 2011 GT in TTS and the 2001 BMW 330Ci in TTD. Then there's another Five Star Ford of Plano sponsored open track day at ECR on November 11th, which we will be at in the 2011 GT.

Don't worry - the 2011 GT will continue on it's own adventures, chronicled in this thread. Meanwhile here's a taste of what we have in store for the 2013 GT:



The one-off flares above are no longer available... but we will make something similar for the 2013. Gotta clear those bigger Hoosiers!

Stay tuned!

[Fair]

Project Update for October 4, 2012: I am a couple of weeks behind on updates, so let's catch up on the 2011 Mustang's latest racing events and changes.

New Suspension Parts & Tweaks

I talked about most of the pre-GTA weekend preparation in my last post (brake pads, rotors, tires) and showed pictures of more stuff, but forgot to talk about the other mods. Whiteline had sent us some additional products to test at Global Time Attack, namely their tubular and adjustable Lower Control Arms with Synthetic Elastomer bushings and a pair of their bolt-on LCA relocation brackets. The LCA relocation brackets are an attempt to fix the rear anti-squat geometry on lowered S197 Mustangs and we wanted to see how this worked in both track and autocross conditions. The Lower Control Arms themselves replace the stamped steel stock pieces, which have big smooshy rubber bushings. For GTA there were no real rules or points to worry about, so we figured we'd give it a try. Long term they will probably stay on the red 2011 Mustang, since we're building the black 2013 GT for dedicated ESP autocross use. For the NASA Time Trial class, we are running the red car in TTS, which means we no longer have to worry about tallying modification points. Pretty much the sky is the limit (TTS/R/U classes mostly revolve around power-to-weight ratios and tire compound).



The new parts are shown installed above. We are now working with the existing Whiteline Watts Link kit, Whiteline Upper Control Arm and Mount, and Whiteline Front and Rear Adjustable Sway Bars + End Links, for a package covering 100% of their S197 Whiteline catalog. We have recently updated our S197 suspension products page page to show all of these items along with the Whiteline Adjustable Panhard Bar, and we already stock and have sold some of these at Vorshlag. A lot of these parts were just released this past month and they made it on our website as soon as pricing was available. We are really liking what they have and I'm glad we picked up the Whiteline dealership (that's the last of the sales-y stuff, I promise!)



Other changes for this weekend of racing include a switch back to Kumho V710 rubber from Hoosier A6. Most people know the Hoosier DOT tire line-up: The R6 is more suited to track use (can withstand longer stints and more heat) and the A6 is for autocross use (heat up quickly, but tend to overheat on longer stints). The V710 is sort of like an R6, so we picked up and mounted two fresh Kumho's in 315/35/18 and ran two of our old Kumho's that have seen a lot of autocross & track use. These two older tires "looked" OK and I didn't want to drop $1600 on a whole new set of Kumho's after just getting back from Nationals and dropping $1600 on that set of A6's (which still looked pretty good, too - definitely worth running at a few more autocrosses).



Lastly, we upgraded spring rates due to the excessive lean we were seeing on the A6's at the Solo Nationals on that grippy concrete. These pictures really amplified how softly we have the car sprung and how little experience we have with the car in ESP use. I think we had four months of ESP preparation before Nationals? Compared to the 1.5 years we spent in STX on street tires, where the old, softer rates worked very well.

In the front we went to 550#/in Hyperco springs, up from the previous 450#/in rates. To match this change up front, we stiffened the rear rates from 175#/in to 250#/in, also Hyperco springs. We adjusted the sway bar settings a bit as well, on a hunch. With the normal track preparation came the rear trunk swap, ridiculously tall rear wing, fluids, inspection, and all of that. We loaded up and were ready to head out to Texas Motor Speedway for early Friday morning, as the GTA event was Friday and Saturday.

Global Time Attack, 9/21 to 9/22, TMS


TMS Infield Course Map

• Results: http://www.globaltimeattack.com/2012...ep-21-22-2012/
• Picture and Video gallery: http://vorshlag.smugmug.com/Racing-E...ck-TMS-092112/
• Moto-IQ Write-up: http://www.motoiq.com/magazine_artic...s-edition.aspx

We arrived at TMS at 7 am Friday morning, with Ryan and Brandon from the shop accompanying me for track-side support and event photography. It was a work day so we didn't expect too many spectators, but we saw a few hundred there - to watch the XTC drift guys...



There is a lot more like that in our picture gallery for this event, linked above, if this is your thing. After looking at what they have to do to these cars ... it is just too much for me to process. They are a unique animal with preparation all their own. I respect their car control and I will leave it at that. Well...



The drifters did spend a lot of time off track and drug all manner of dirt and crap onto the racing line that the Time Attack drivers had to deal with. Luckily the TMS track workers cleaned up pretty well after each XTC session, before GTA took to the track. Pretty well. I am glad XTC worked with GTA (and Hot Import Nights) to get this joint-event to happen. So that's all I'm going to talk about the drifting.



We grabbed a prime paddock spot for the trailer, unloaded the car, set up our sun shade, dragged out the compressor, generator, and cooler and put out half a dozen chairs. Then we aired up the tires and wired up the video camera and AIM SOLO. NASA New Mexico sanctioned this event, so already having a NASA Log Book and Annual TT Tech for the car helped me breeze through tech inspection.



KenO was there in his E46M3 "TTB" street car and he helped me set-up the AIM and get a beacon set for start/finish. We went to registration when the GTA guys arrived, picked up all of our stickers, and got to work getting the proper decals applied. Ken showed me a trick to "remove some stick" from the big number board decals, since they needed to come off Sunday for the SCCA Autocross. Stick it on and pull it off your shirt a few times, then stick it on the car. Worked great!


Left: KenO in the Enthusiast RWD winning E46 M3. Right: Me hand signaling Ken, "asking for a pass".

Ken was also a big help teaching me the proper line around this track, as he was the only driver entered who had ever run this 1.36 mile infield course (the "red" one in the track map below) in anger, driving in Corvettes at some driving school thing. I had run some of this course at a few Texas Region SCCA autocrosses, but that was MUCH slower, with slaloms on the main straight and weird offsets in all of the fast parts. After making a couple of recon laps, I realized my autocross experience on this layout helped me -0-. I did some lead follows behind Ken in the first day's second session and figured out where I was screwing up, royally. Then by the second day Ken's TTB E46 M3 on street tires was all kinds of in my way. :P

more below...

[Fair]

continued from above


In-car video from Day 1, Session 3 laps... best of 40.66 seconds.

The track layout looked simple enough - eight turns and very little camber change, but with the ample rumble strips and high speed offsets it was pretty tricky. Many GTA drivers had offs and there was even one pretty good sized crash (Mustang lost brakes and backed into a tire barrier, totaling the car). Ken and I were pounding out 15-20+ laps in each twenty minute GTA session, whereas the other Time Attack series regulars would take three lap stints and call it quits (warm up, hot lap, cool down). And when you see the insane turbo cars that GTA caters to, it kind of makes sense. In their unusual categories they have Enthusiast, Street, Limited, and Unlimited, with further FWD/AWD/RWD segregation in each class.


The Unlimited AWD and Overall winner, GST's "Subaru" with 670 whp and 2500 pounds with a composite body and lots of aero.


Showing the GST's rear mounted radiator and diffuser, plus the massive driver & controls setback.

So what moves you up a class? Your tires. Almost 100% of the rules revolved around tire treadwear, something I have never seen before. That meant that the even the lowest preparation level Street & Enthusiast cars running on 140+ treadwear tires still had 600whp or more. I'm not making this up - these GTA cars are no joke when it comes to power. There isn't much difference in preparation/power from there to Limited and Unlimited, just the tire compounds. Limited was 60-140 TW and Unlimited was 0-60 TW. What did I bring? 40 treadwear Kumho V710s, which moved me all the way to Unlimited RWD. In a street car that weighs 3540 pounds... oh boy.



Well nobody else showed in Unlimited RWD, so I had a class to myself. But that meant there would be no payout for a win either. Still, I wanted to compare my times to the overall fastest, if I could be close. Surprisingly Ken and I weren't doing half bad on the first day, with the 2nd and 3rd fastest times in the earlier sessions (we ran more laps per session and I guess figured the course out sooner?). By the end of day one, I had fallen to 4th quickest time overall. The Mustang was VERY loose on all corners and I was chasing the set-up all day. Turns out all of these handling complications were from the tires. Two new tires up front overpowering the very worn out rears. I'm such a dummy... I know better than to run old tires with new tires!



After a big delay getting into the gate at TMS (they wanted to keep us out until 10 am!), we finally got back inside by 9:15am for the Saturday portion of the GTA event. I had stopped by the shop and grabbed the used 315/30/18 Hoosier A6's that Amy and I had run at the Solo Nationals a couple of weeks earlier. They were half gone, but still in better shape than the rear Kumho's, and laughably the A6's had a higher treadwear than the V710's! (using treadwear as an indicator of grip is a mistake, IMHO). So we were going to ask the "tire guys" that follow the GTA circuit to swap tires on the Forgestar wheels for us, but their machine would have trashed the lips.



Ed and JasomM instead took the wheels to a local Discount Tire, swapped the V710's for the A6's, and made it back with six minutes to go before our first session of the day. With air tools, two jacks, and many hands we got the wheels bolted on and took to the track in time to get in some quick laps.

I made three laps, came into the hot pits for a tire bleed... nobody was there. Crap! Drove into the paddock, bled the tires down, then had to wait in line to get back on track (since I left the hot pits). I finally made it back out and within a few laps I had busted off some 39 second runs. Woo! That was my goal - break into the 39's and I did it in the first session. I did another four or five 39 second laps just to make sure, then I came in. My original goal was once I ducked under a 40 second lap, I was going to stop for the day and try to preserve these semi-fresh A6's for some additional autocross use later this year, before we switch to the 2013 GT for our ESP thrills.

I felt great and was thinking I was sitting in 3rd place overall, against some crazy ass race cars. The GTA crew didn't have the official times displayed for another hour and right before session two was about to start, the printout was displayed for session one... and my name was nowhere to be found. WTF?!


In-car video from my Day 2, Session 1B runs... which don't count, because the transponder was tuned off!

Oh no.... (lightbulb) Oh no! I quickly ran to the car, opened the hood, and immediately realized that I screwed up and left the wired AMB transponder turned off for the entire first session! GRRR! I was so mad at myself and had wasted the only cool track session on the A6's we would have that day. You see I had turned the transponder off overnight, while the car was parked in the trailer, to save the car battery. So none of my 39 second runs were timed by the GTA folks and I only had my in-car AIM Solo to go by. Well crap.

Then the transponder switch, which is backlit when "On", started flickering. Then it went off right before my eyes. I tapped it and it came back on. Tapped it again and it went off. The switch was dying?! So Ed quickly hot-wired the transponder literally seconds before the second session started. I got at the front of the line and waited. And waited. After 10 minutes they told us that a car had gone off and hit a tire barrier, and the flat bed was bringing it in.



Yeeesh, that looked ugly. The driver was fine, but the car was toast. The clean-up took the entire 20 minutes and the second session was cancelled. Meanwhile the temperatures climbed from the high 70's into the high 90's and we had our 1.5 hour lunch break. The whole crew piled into the MegaCab and we got some food a few exits down the highway. I was fit to be tied as I watched the temperatures climb. Matching that 39 second time seemed impossible as the track temps crept up past 120°F, but I was bound and determined to get a sub 40 second lap. We got back from eating and I went out in session three and started using every inch of the track. Here's some of the last laps in that session, where I finally cracked off two 39 second laps! This was after three previous sets of three laps that resulted in a best of only 40.12 seconds. Whew!



That took everything I had and as you can see in the video, I was using the "Green Line" - with the inside two tires over the lipstick stripe and maybe even a tiny bit on the grass. Hey, we asked in the driver's meeting and they said "only one wheel has to be inside the lipstick", so I keep eeking wider and making my line at the start/finish offset straighter, and wasn't using as much "green" as one particular driver who shall remain nameless (cough... Ken... cough). I never got all four off (which would result in a DSQ for the entire session) and managed to squeak a couple of high 39 second laps in, with the results showing a best lap of 39.975 seconds. It wasn't as quick as I ran in the morning, even when I was taking no chances and barely touching the lipstick, but it was sub-40 and I was happy with that. The ambient temperatures were 100°F and I knew I wasn't going to find more than a tenth better lap than that, with as overheated as I and the tires were both getting.



continued below

[Fair]

continued from above


We came in and let the car cool off and the crew started breaking down the trailer equipment while I walked the Hot Import Nights car show area quickly. Wow... I cannot describe this scene at all. I felt like I was on another planet. Cars with 15 degrees of negative camber, "poking" and "tucking" and "thumping". I don't "get it", none of it, so I guess that means I am getting too old. I did see the local Enkei rep and got to talk about upcoming new wheels for the FR-S/BRZ twins, which was cool. By the time I had made a lap of the HIN show, the Mustang had the spoiler installed in place of the wing, was loaded in the trailer, and the sun shade was rolled up. I talked briefly with the Mustang driver that wrecked and had the worst kind of day, then we rolled out by 3:30pm. I wish I would have stuck around for the 7pm awards ceremony, complete with video/pictures/champagne, but Amy and I had another day of racing on Sunday and we needed to go home and collapse. We used that saved 3.5 hours to catch some ZZZZs.



(Continued from above)

Overall, the GTA event was intense and a lot of fun. We had a crowd watching and cheering, which is rare at any track event, even if they were mostly there to see the drifters (and I gave them some of that on Friday). I got to meet some cool racers, talked face-to-face with more of the Whiteline folks, did a video interview for them, and just had a great time. Before this event I was worried that I would be super slow and way off the pace, but the big 3500 pound Mustang did all right, placing 5th fastest overall and one of only five cars to break the 40 second lap barrier.

For the "class of one win" I banked $300 of Whiteline product credit, a pair of Oakley Sunglasses from FIAT, and get to go down in the record books as the Unlimited RWD track record holder for TMS (shrug). Congrats to AST/Vorshlag Tester KenO for his big win in Enthusiast RWD (he banked $800 in contingencies and the free sunglasses, too). Another local NASA TT racer with Vorshlag camber plates, Jeff Tan, managed to win Enthusiast AWD in his EVO X, also netting $800 in contingencies. I gotta give a big thanks to all the folks who came out to help crew - Ryan and Brandon on Friday, and Amy, Ed, Jason and PaulM on Saturday. The car was rock solid and had zero drama, doing nothing more than eating fuel and gobbling up more track miles.

SCCA Autocross, Dallas Raceway, 9/23



After two days of brutal heat (99°F), we were now supposed to spend a third day in the same heat at an autocross. These three day race weekends never work well for me and this time was no exception. Because we were already fried, we left the house late and arrived behind schedule, limiting us to one quick walk-through on a very complicated, busy, poorly flowing course (sorry JJ!) on a brand new event site that we were unfamiliar with. The site has drainage down the middle that fills with water and then algae, and this section is SLICKER THAN SNOT. The course that day crossed this section on the outside of a corner in an acceleration zone, which made for tail-happy driftoro. Then it got into it again during a heavy braking zone at the start of a tight slalom, which caught me out again many times.

• Results: http://texasscca.org/2012_solo_resul..._final.htm#ESP
• PAX results: http://texasscca.org/2012_solo_resul..._final.htm#ESP
• Picture & Video Gallery: http://vorshlag.smugmug.com/Racing-E...andall-092312/

Can you tell I'm setting this up with low expectations? After the wing was swapped for the spoiler (end of day Saturday at TMS), we kept the now well abused A6's on the car and just ran it in ESP as-is. Barely had time to adjust tire pressures and then we had to work first heat. I was the announcer and Amy worked the computer, which tends to run a bit long. We had to run over and grab the car and our gear, then hustle to get into the "two driver lane" in the very compressed grid area. By the time we pulled up they wanted us to run, so I hopped in and took a run. And promptly DNF'd.



OMG it was slick and the course was very ... quirky. Nothing flowed well, you came into turns all crossed up and pointing the wrong way, and the slaloms were tight. The 180° turn-arounds were also tight tight tight for this big car and I was fighting the course and the car all day. The "slick patches" also caught me out badly on four of my five runs. On my first run, the car got so crossed up that when it hooked up, it kicked the steering wheel back FAST. My thumb hooked on a spoke and when the wheel kicked back it ripped my hand so hard it damn near broke my left wrist. Two weeks later and it still hurts. So I finished my first run one handed and favored my right hand all day for driving. Excuses ... I gots em!


In-car video of my 3rd run is linked above, with ample mistakes.

We also had to rush rush rush to get the driver & numbers switched and barely had time to check tire pressures and spray them a bit to cool them off (it was HOT). Luckily Ed from Pirtek was there and helped us after every run. And who else was running at this event? None other than Jason McCall and his BMW Z3M LS1, which made its debut race at this event!


Jason McCall's Z3M LS1 - It Lives!!!!

continued below...

[Fair]

last one...

Long story short, I drove like crap and wasn't well prepared for this event. Our 8 time ESP National Champion, Mark Madarash, was there in his flyweight Firebird and he schooled the entire ESP class, taking the win and setting Top PAX for the event as well, using only four of his allotted five runs. I fumbled my way through all five runs - getting lost, blowing corners, late into slaloms, DNF'd, double-apexing turns, and generally driving like a total ass hat. On my fifth run I almost put one together, but still lost the brake booster into two turns and blew my lines. Would I have caught Madarash with a miracle hero run? Probably wasn't going to happen, even with a better driver. Our Mustang is still 400 pounds too heavy and needs a lot more to keep up with that proven ESP winner.



The issues we had were also too numerous to count. The brake booster assist failure cropped up for me on all five runs, so that lovely problem has returned. We have yet another replacement vacuum check valve coming from Ford (and another as a spare!) as this seemed to fix the problem after the Optima event in June, where it was a big hindrance.


In-car from my 5th and fastest run is linked above. It is still terrible.

Might not seem like a big deal - losing the vacuum assist - but in this car when the booster goes away, suddenly it really throws you for a loop and blows your concentration. The pedal works fine, but after a long straight with high rpm usage it would intermittently lose assist and you felt like you were stepping on a brick, the pedal doesn't move, and the car won't stop. It wasn't consistent, but it did happen to me on every run.


Looks like much less lean here than at Nationals thanks to the new, stiffer spring rates.

When this happened at the Optima Challenge I luckily had a dozen autocross runs to put one together, and many laps on track to adjust my braking zones. You have to press the brake pedal with both feet and PULL on the steering wheel to get enough pedal movement to stop. It was exhausting at ECR back in June, but after we replaced the check valve in the booster it went away completely at the next ECR event in late June. So... just like the S197 front wheel hubs (we're on the third set in two years), the vacuum booster check valve has become a wear item, with spares to be kept in the race trailer. Live and learn.


Amy's 5th and fastest run is linked above.

Amy had a pretty good day, finishing third in class and 25th out of 126 in PAX, but she was a solid 1.4 seconds back from me. Just not driving aggressively enough? She got caught out by the slick spots and slalom timing on her best run also, but as always she still looks a lot smoother and cleaner than my hack driving runs. She is adjusting from street tire to R compound grip, slowly but surely. We need to keep getting her more and more seat time - when we all ran in STU for years she would regularly be on the same half second as Brian and I.

I think I need to avoid racing on three consecutive 100 degree days. I never do well in that type of prolonged heat. By Sunday I was sporting a massive headache and muscle aches, which meant I was low on water and salts. Stupid mistakes were abundant. As well as I felt that I drove on Friday and Saturday, I more than made up for it on Sunday with terrible driving. I really wanted to run GTA and this SCCA event, but probably shouldn't have done both.

What's Next?

This weekend, October 6th-7th, is the annual NASA race weekend at Eagles Canyon Raceway - which is what I consider my "home track". We had planned on running the red 2011 GT in TTS and the blue BMW E46 330Ci in TTD, but alas, the painter was delayed and the E46 will not be ready in time. Sucks, because we had run times 3+ seconds quicker than the old record (set by Costas in this same BMW in 2010, on street tires) with the 285 Hoosier R6s we can run in that class. Oh well, we will run the black 2013 GT in TTB (and get slaughtered) and the red 2011 GT in TTS and just have fun. I could get lucky and beat the existing TTS record at ECR (1:58.2), as I ran almost that quick back in June on the old Kumho's with the steering shudder and the old clanking PHB, but who knows? If fast Corvettes show up or the existing 350Z record holder are there, I'm sure they will be shooting to beat that record, too.

After the NASA weekend is a SCCA Club Race and PDX event on October 13th-14th. We had entered both Mustangs for that HPDE-like event, but will likely run the 2011 and the blue BMW there instead. Once the blue BMW gets back from its fresh paint job and gets some on-track laps/video/data, we will put it up for sale. We never drive this car and with seven cars and only room for six at our home garage, we need to "reduce the fleet".



I also have to get caught up on some pictures and text for the initial 2013 GT "ESP" thread. We have already done a lot of weighing and planning, parts are some coming, we have 18x10s on the car, and camber plates are going on today.

More soon!

[Fair]

Project Update for Oct 11, 2012: We drove both the 2011 and 2013 Mustang GT's at last weekend's NASA Time Trial event at Eagles canyon Raceway (ECR). I had planned to wait after this coming weekend's SCCA Club Race/PDX event but they cancelled it, so I will share what we have learned now instead. I'm still writing the 2013's first post in its own thread, but it is coming soon. We also did some dyno pulls on both Mustangs and the 2013 BRZ yesterday at True Street Motorsports, so I can share those as well.

Pre-Race Prep

As mentioned in my last post the '11 GT needed surprisingly little prep before this NASA race weekend. We had just run it at the Global Time Attack and a local autocross just 2 weeks prior and all of the then newly added Whiteline rear suspension bits were working perfectly - and with two weeks of silent street use we were all smiles. Other than two more new Kumho V710 tires, an oil/filter change, and the swap back to the winged trunk and race tires, it was an easy prep.



That shot above shows all of the Whiteline goodies. These changes + the slight bump in spring rates are all that were different from the car in June when we ran ECR and I knocked off a 1:58.2 lap, using Hanchey's AIM Solo in-car lap timer. We were back to running Kumhos again, and otherwise on the same suspension (Motons + Vorshlag plates) and running the same power level (430 whp) and aero (our custom mega wing + LS splitter).



The black '13 GT, however, needed much more track prep help - but we only had one day to do it, with the sudden change of schdule on our E46 BMW. While the '13 started out life 45 pounds lighter than the '11, it was much less equipped, and missing the much-loved 14" front Brembo brake package - which also includes wider wheels, and different shocks/bars/springs (we think). We had planned on taking our 2001 BMW E46 330Ci to run at ECR in the TTD class, but our painter needed more time so the car wasn't going to be ready, so we hurriedly put the 2013 GT into some sort of track-ready form.



It was still bone stock, with the craptastic 235/50/18 all seasons, 18x8" wheels, stock non-Brembo brakes, stock pads/brake fluid, and stock base GT suspension (which I think is different than the shocks/bars that come on the Brembo equipped cars). I couldn't bare to run this car this stock, as it would shred the tires and be laughably slow, so we threw some parts at it on the Friday before the event. A set of Vorshlag camber plates took the front camber from 0 to -1.7° (with lowering springs the max negative number is closer to -2.8°), threw the old Eibach front bar from the 2011 on, and slapped on a set of our Vorshlag 18x10" wheels and that old set of 295/35/18 Nitto NT-05s that I ran at the Optima Challenge.



As you can see, switching from the skinny 8" wide wheels and 235mm tires to the 10" wide D-Force wheels and 295mm Nittos actually helped the car lose over 27 pounds of unsprung weight/rotational inertia. That is a huge win, but the +60mm of tire should add more grip, too. The crew here tried to convince me to get a set of track-worthy pads for the '13, but I veto'd the idea, as we are chucking the whole stock brake set-up into the trash very soon and I didn't want to waste $300+ on track-worthy pads for a single event. I said "Hey, they are 13" front brakes, how bad could they be?!" I also blew off flushing out the stock brake fluid with some better Motul RBF600 that we stock and sell. Turns out those were two crucial errors in judgement on my part...

NASA @ ECR, Saturday Oct 6

We loaded up the '11 in the trailer Friday night. JasonM made new number and class graphics for both cars and we applied those at about 6 pm - right as the weather went from 80°F and sunny to COLD and overcast. Uh-oh... the forecast looked bleak but I towed the trailer out to ECR early Saturday morning, with Amy following me in the '13. Had to park in the gravel as the place was packed with NASA racers (something the SCCA club racers are sorely missing - more on that in a minute). The HPDE groups were loaded up, as was the Time Trial group, and three big W2W race groups. Pretty good, considering the crap weather and late event date in the year (over a month after the NASA Nationals).



We quickly unloaded and fueled up the 2011 and got our butts to grid. Amy was the lucky driver of the 2011 on Saturday and she ran in the TTS class against a very well prepped C5 Z06, an S197 Mustang AI car with big aero on Hoosiers, and many other quick TT racers. I was the unlucky schlub in the 2013 GT for the day, woefully under-prepped for TTB class - running against TTB fiend KenO and his Vorshlag/AST sponsored E46 M3; he already owned the previous TTB ECR track record at a 1:59.8, which he reset this past weekend by over a second - and he drives the car to and from the track, with a full interior. Anything sub-2 minute is QUICK at this track, too.



Let me back up a second - before the Saturday TT event even began I heard about a fellow TT competitor that crashed coming out of Turn 4 on Friday's practice event. A little tank slapper off into a 2000 pound hay bale that pretty much totaled the right side of this EVO X. So that's two totaled cars in two weeks from local Time Trial competitors - the Mustang at GTA and this EVO here. That sucks, but this is what can happen when you track a car at 10/10ths (or 11/10ths?) Don't forget the potential consequences, and don't short change your own personal safety. Luckily this driver also walked away unharmed, just lighter in the wallet.

Our Previous Lap Times at ECR

So back in early June I ran a 2:03.9 at the Optima Challenge on the 295mm NT-05 street tires, bitching about tires the entire time. The rears would overheat on the '11 within half a lap and I had to baby the throttle everywhere. That was with all of the same aero and the Moton Club Sports but an aftermarket PHB and the softer 450/175# spring rates. Then when we went back in June 23rd at the Five Star Ford track day I ran the big 315mm Kumho V710s, but otherwise the same suspension and aero, and turned a best lap of 1:58.2. Both June events had ambient temps exceeding 100°F. That 1:58 time in June was actually faster than the old track record for NASA TTS class, which was a 1:58.4, set in 2011. So we had thought all either Amy or I had to do was match or better that time from June and we could set a new track record in our street driven Mustang.

continued below...