Getting inspection

[UT5.0]

I have an off road x and was wondering whatS the best way to get an inspection. Any places that dont care or something?

[Grandpa]

Go to a Quick Lube or something on a Saturday it's busy. They won't even look.

[Phuck Phace]

Are you throwing any codes or just worried about the visual inspection?

[Midnight11]

Get inspected in Austin doubt they care there

[UT5.0]

Im not throwing any codes, just worried about the visual inspection... If you fail at a certain place does anything bad happen?

[Midnight11]

they wont look under the car. i had a cutout on my truck and they didnt say anything about it

[Doug1227]

This is something I've been curious about as well. From my understanding, there are (3) situations that can potentially cause you to fail. 1) Failing visually 2) A check engine light or code 3) The O2's being "not ready".

Is this accurate? I'm not too worried about 1 or 2, but #3 is the one that you can't really be aware of until you fail. I've read that it can be addressed in a tune, but I don't know what the tuners have included. My tune has the rear O2's turned off since I'm not running cats, but from my understanding, by turning them off, they can still trigger a "not ready" status during inspection and fail. Let me know what you know on the subject. I have until June '13, so it's not urgent.

[DirtyD]

vehicles of model year 2000 and newer are allowed the failure of 1 major systems component to pass inspection. for awhile my truck was not resetting the EGR due to a widely known issues with the intake gaskets, but I was still allowed to passed inspection because everything else was in accrodance.