In summary for tonight, the intake tube, airbox, all hoses connecting to it, the intake manifold, fuel rails, etc. were removed. I pulled everything off of the intake manifold I'll reuse. Removed the fuel rails, swapped out the injectors with the new 80's and removed the throttle body from the manifold. The next steps tomorrow are to remove the front fascia and start making mods to accommodate the large intake tube. My goal is to get halfway through by the end of the day tomorrow, which would be for all the cutting to be done, air-to-water intercooler installed, bracket with pulleys installed, etc. I aim to have it all done by Friday night, but if it spills a little bit into the weekend, so be it. I'll post up more tomorrow!
|
Threaded Mode
