Dallas Fort Worth 5.0 Mustang Club
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Dallas Fort Worth 5.0 Mustang Club (http://www.dfw50s.com/index.php)
-   Performance (http://www.dfw50s.com/forumdisplay.php?f=30)
-   -   I'm bored so I might go ahead and buy some......**Attention TrueStreet**. (http://www.dfw50s.com/showthread.php?t=318)

Phuck Phace 09-05-2012 10:16 PM
Very interesting.

BLK2012GT 09-05-2012 10:17 PM
Quote:
Originally Posted by Toby (Post 4513)
Let me get with Tim tomorrow and we will get you a price. Have not done cams on a new 5.0 yet, but yes it is a very very extensive install on these cars to be done properly. I would HIGHLY recommend doing the billet oil pump gears while in there. One will already have the chains off, entire front engine apart etc. Only a couple more hours labor to properly install the billet gears. Look for a pm tomorrow before the end of the day, we are in the process of switching phones, internet etc at the shop over to the new building so might not be till the end of the day.
That's cool it's no hurry or anything. Just let me know.

OG Fox 09-06-2012 12:03 AM
Keep in my mind they had boss intake and long tubes, but yeah I'm interested in this also, 477 na Can't be beat. And with nitrous, that's some unreal power.

BLK2012GT 09-06-2012 12:10 AM
Quote:
Originally Posted by Blue Devil 5.0 (Post 4522)
Keep in my mind they had boss intake and long tubes, but yeah I'm interested in this also, 477 na Can't be beat. And with nitrous, that's some unreal power.
Already got the boss intake and BBK longtubes.

0Boost 09-06-2012 02:10 AM
Those stage 3 cams will lope quite a bit. Remember that you lose a massive amount of timing when you install AM cams, I believe a good 25 or more degrees. Stock allows about 50. Also your low end power will be gone completely and it will be high end only. Looking forward to what you choose to do. IMO, I would only do cams with a blower. Just me though :P

Dan12GT 09-06-2012 05:56 PM
Get the cams Jeff! Then I can really decide if I want to do it down the road... LOL!

BLK2012GT 09-06-2012 06:19 PM
Quote:
Originally Posted by Dan12GT (Post 4608)
Get the cams Jeff! Then I can really decide if I want to do it down the road... LOL!
No problem Danny I'll do it just for you.:High 5:

Dan12GT 09-06-2012 06:20 PM
Fantastic!

BLK2012GT 09-07-2012 06:28 PM
Still waiting to hear from TrueStreet

TrueStreetTim 09-07-2012 07:01 PM
Quote:
Originally Posted by BLK2012GT (Post 4718)
Still waiting to hear from TrueStreet
Stand on me for the delay! I haven't had all my resources during this move. Call me at the shop tomorrow and I'll tell you what we're willing to do! 972.542.9886

BLK2012GT 09-07-2012 07:06 PM
Quote:
Originally Posted by TrueStreetTim (Post 4720)
Stand on me for the delay! I haven't had all my resources during this move. Call me at the shop tomorrow and I'll tell you what we're willing to do! 972.542.9886
Ok cool thanks

Phuck Phace 09-07-2012 07:14 PM
Then let me know too.

TrueStreetTim 09-08-2012 12:57 PM
Quote:
Originally Posted by Phuck Phace (Post 4723)
Then let me know too.
Phuck yeah!

Phuck Phace 09-13-2012 01:15 PM
Curious, what was the word on this?

TrueStreetMotorSports.com 09-13-2012 05:26 PM
Quote:
Originally Posted by TrueStreetTim (Post 4720)
Stand on me for the delay! I haven't had all my resources during this move. Call me at the shop tomorrow and I'll tell you what we're willing to do! 972.542.9886
Quote:
Originally Posted by BLK2012GT (Post 4721)
Ok cool thanks

We never got a call to go over this...... :handshake:


All times are GMT -4. The time now is 01:41 AM.
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.