dfw

**Bacadiesel** · 11-25-2013, 09:09 PM

Hey this guy taught me a little trick. Tape a string to your fender and let it hang down, maybe tie a bolt or something heavy at the end of the string to keep it from moving. And measure from string to wheel bead

**Dominic Toretto** · 11-25-2013, 09:23 PM

Originally Posted by Bacadiesel

Hey this guy taught me a little trick. Tape a string to your fender and let it hang down, maybe tie a bolt or something heavy at the end of the string to keep it from moving. And measure from string to wheel bead

At this point, I think it would work better by just using a sledgehammer on the driver's side wheel.

-Alex

DarkHorse1350 · 11-26-2013, 10:21 AM

Originally Posted by Dominic Toretto

At this point, I think it would work better by just using a sledgehammer on the driver's side wheel.

-Alex

Alex are you close to the Irving area? If so I would be happy to help adjust as needed.

If your bar in completely compressed you are seeing the correct results, you need to "unscrew the bar to push the passenger side away from the axle center. By "screwing" the bar tighter you are actually pulling the passenger fender closer to axle center.

**Dominic Toretto** · 11-26-2013, 10:29 AM

Originally Posted by DarkHorse1350

Alex are you close to the Irving area? If so I would be happy to help adjust as needed.

If your bar in completely compressed you are seeing the correct results, you need to "unscrew the bar to push the passenger side away from the axle center. By "screwing" the bar tighter you are actually pulling the passenger fender closer to axle center.

I'm in Irving but, I do not have access to a lift or jack stands. It's not a big deal but, I don't mind showing you the car.

-Alex

DarkHorse1350 · 11-26-2013, 10:37 AM

Originally Posted by Dominic Toretto

I'm in Irving but, I do not have access to a lift or jack stands. It's not a big deal but, I don't mind showing you the car.

-Alex

I have all the needed tools. If you want to try to get it lined up let me know Ill have some free time on Sunday.

**Dominic Toretto** · 11-26-2013, 10:46 AM

Originally Posted by DarkHorse1350

I have all the needed tools. If you want to try to get it lined up let me know Ill have some free time on Sunday.

Thanks man, appreciate it. PM will be sent.

-Alex