Finally got the faux gas cap situation done with an acrylic disc. Lots of work on the 13-14 but at only $18 for the disc I'm happy with it.
Basically you have to remove the black factory disc(I cut around the gt with a Dremel and pried it off with a flathead screwdriver), then you can pop off the remaining faux gas cap piece by pushing in 4 tabs(used mini screw drivers) and prying it with a regular flathead screwdriver. Finally you have to sand the gt letters down completely smooth, peel the backing off the tape on the disc, stick in on, then pop the whole assembly back onto the car
Finally got the faux gas cap situation done with an acrylic disc. Lots of work on the 13-14 but at only $18 for the disc I'm happy with it.
Basically you have to remove the black factory disc(I cut around the gt with a Dremel and pried it off with a flathead screwdriver), then you can pop off the remaining faux gas cap piece by pushing in 4 tabs(used mini screw drivers) and prying it with a regular flathead screwdriver. Finally you have to sand the gt letters down completely smooth, peel the backing off the tape on the disc, stick in on, then pop the whole assembly back onto the car
Pics of the process and finished product?
__________________
The Queen:
2013 Race Red Mustang GT 6MT: 20" AMR's, GT500 AB, JBA LT's and ORX, SCT SF3/X3, MGW Short Throw, Some Carbon Wrap, Spoiler Delete, Eibach Sportlines, Koni STR.T's, BMR LCA's, BMR Relo Brackets, BMR UCA, Freedom Racing PHB, Maximum Motorsports CC Plates, BMR Safety loop, DSS Aluminum DS
The tape provided is only horizontal so it doesn't grip very good due to the curvature of the faux gas cap area. I have it off right now redoing my paint work on the trim ring, and then I'm gonna pick up some better adhesive
Completely removed the gt area to hopefully lessen the curvature
Hybrid Mode
