Foxbody 5.0s For the original 5.0s that started it all |
Sponsored Ads |
|
Welcome to DFW50s.com
|
Register to remove these ads.
04-01-2013, 02:36 AM
|
#1
|
Supporting Member
Join Date: Jun 2012
Age: 40
Posts: 915
|
Need tips on motor swap?!
Wanting to swap a motor eventually on the 82. Would like to keep in the Ford Family. Im wanting to make around 450-500hp to the crank and stay around 5k. I need the help of some wise fox body gurus on this one. Thanks.
|
|
|
04-01-2013, 09:17 AM
|
#2
|
I> /\/\
Join Date: Jun 2012
Location: A fender ahead of BlownAltered
Posts: 7,562
|
Shop wisely and do a Terminator swap. It would be ridiculous fun in that car. I recently saw that Teal 93 Cobra with the swap done and a VMP blower making over 680 at the tires. Insane!
<---in before Strokd's usual mod motor hate and "windsor blah blah blah".
|
|
|
04-01-2013, 01:29 PM
|
#3
|
Old School
Join Date: Oct 2012
Age: 46
Posts: 1,358
|
Originally Posted by Steve
Shop wisely and do a Terminator swap. It would be ridiculous fun in that car. I recently saw that Teal 93 Cobra with the swap done and a VMP blower making over 680 at the tires. Insane!
<---in before Strokd's usual mod motor hate and "windsor blah blah blah".
|
I was rolling my eyes reading that shit too...
OG, do a budget 408 setup. U can get a nice race motor from yellow bullet like mine for 3-4 grand, throw some heads on it and a nice carb/intake and you will be set. I sold my old 408 for 2k btw, a rebuild woulda been another 1500 and you could have thrown a 300 shot on it for fun if you needed it. The kid I sold it to made 497 rw through an auto with it... on motor, he hasnt sprayed it yet as its running deep 10s as it sits and he's happy with it.
PM me if you want, we can get into the logistics in more depth. Be happy to help you keep it from being a mod motor swap.
__________________
86 GT 374 Billet "W" w/ 72MMs
90 GT 351 Dart short stroke w/ YSi
|
|
|
04-01-2013, 10:19 AM
|
#4
|
I have a small penis
Join Date: Nov 2012
Location: Making Steve my bitch since 2003
Age: 44
Posts: 1,465
|
Originally Posted by OG Fox
Wanting to swap a motor eventually on the 82. Would like to keep in the Ford Family. Im wanting to make around 450-500hp to the crank and stay around 5k. I need the help of some wise fox body gurus on this one. Thanks.
|
H/c/I and a supercharger on a 302 and you have what you want. No need to swap to a terminator which would be more than 5k. I make that power and my combo is far from turned up. Shop the used market and you can get parts for cheap.
|
|
|
04-01-2013, 10:36 AM
|
#5
|
I> /\/\
Join Date: Jun 2012
Location: A fender ahead of BlownAltered
Posts: 7,562
|
Originally Posted by blownaltered
H/c/I and a supercharger on a 302 and you have what you want. No need to swap to a terminator which would be more than 5k. I make that power and my combo is far from turned up. Shop the used market and you can get parts for cheap.
|
Incorrect. You can get drivetrains cheaper than 5k now. Gotta remember, the cars are over 10 years old now. lol.
I've had both and the Terminator set up is WAY more fun to drive on the street with the instant torque. It will also make more power.
Your typical h/c/i + blower setup on a stock block will make around 500rwhp/low-mid 400tq. Which is still fun, but not as much fun as the Terminator set up. In order to make more power with the Fox set up will require a better block and internals which makes the cost arguement void since it will run about the same if not a lil more.
The stock shortblock in a Terminator set up will easily handle 600rw and more. Putting that set up in a Fox is silly fun because of the amazing power to weight ratio. All that torque in a fox makes them monsters on the street!
And do not forget that intoxicating PD blower whine. Ohhhh, sooo sexy. I miss it so much!
|
|
|
04-01-2013, 11:31 AM
|
#6
|
I have a small penis
Join Date: Nov 2012
Location: Making Steve my bitch since 2003
Age: 44
Posts: 1,465
|
Originally Posted by Steve
Incorrect. You can get drivetrains cheaper than 5k now. Gotta remember, the cars are over 10 years old now. lol.
I've had both and the Terminator set up is WAY more fun to drive on the street with the instant torque. It will also make more power.
Your typical h/c/i + blower setup on a stock block will make around 500rwhp/low-mid 400tq. Which is still fun, but not as much fun as the Terminator set up. In order to make more power with the Fox set up will require a better block and internals which makes the cost arguement void since it will run about the same if not a lil more.
The stock shortblock in a Terminator set up will easily handle 600rw and more. Putting that set up in a Fox is silly fun because of the amazing power to weight ratio. All that torque in a fox makes them monsters on the street!
And do not forget that intoxicating PD blower whine. Ohhhh, sooo sexy. I miss it so much!
|
You can't be serious on cost. So your telling me he is going to get a k member, headers, fuel system, motor, computer, wiring harness, tune and tranny for under 5k. You can't do that swap in a fox without the above, so lets see how you make that math work.
|
|
|
04-01-2013, 11:58 AM
|
#7
|
I> /\/\
Join Date: Jun 2012
Location: A fender ahead of BlownAltered
Posts: 7,562
|
Originally Posted by blownaltered
You can't be serious on cost. So your telling me he is going to get a k member, headers, fuel system, motor, computer, wiring harness, tune and tranny for under 5k. You can't do that swap in a fox without the above, so lets see how you make that math work.
|
Re-read what I said. Drivetrains. Yes, you can get motors/trans for 5k or less now. Any "swap" is going to have additional costs.
It's just my opinion, I think the Terminator swap is badass. It's worth the cost and when it's done right the Modfox's are amazing cars. There are several of them on SVTP putting down over 650rw to the tires, running well into the 9's all the while still getting great mileage and FAR beyond street manners any Windsor could ever hope for with it's superior ease of tuning.
That 93 Cobra with the swap that Kevin just tuned was a perfect example of what a well done swap car can be. Almost 700rw with over 580tq on E85. Drives like stock until your foot is in it then it's a monster.
I love the Windsors too. Strokd's 408 YSi combo was a fast car for it's day and I had a ton of fun in that car too. But it's street manners were more race car like and I personally prefer the modern tech and drivability to almost a race car on the street.
It's the same with his Dad's vert. 302 stroker with a YSi that makes around the same power as the swapped 93 Cobra car. But it's got a block, FAST, fuel system, YSi blower etc and it's unreliable as fuck. Just as expensive if not more than the 93.
Swapping to a Coyote motor could be an option too. Basic bolt ons would yield great power, factory reliability in a N/A form. Later down the road could be boosted too when funds allow.
I just don't see the point of sticking a weezy under powered 302 that will struggle to make decent power and have crap drivability. With all the great modern drivetrain options why not go with something that will drive better, get better mileage, make power and have a bunch of tuning options for?
|
|
|
04-01-2013, 12:05 PM
|
#8
|
Member
Join Date: Oct 2012
Posts: 35
|
If you're planning on pushing at or around 500hp with the 8.2 deck then you definitely need to stay away from a stock block. You could go with something 351 based (393, 408..etc) and easily hit your goals, and still have some room for growth.
|
|
|
04-01-2013, 12:15 PM
|
#9
|
I> /\/\
Join Date: Jun 2012
Location: A fender ahead of BlownAltered
Posts: 7,562
|
Originally Posted by Mike
If you're planning on pushing at or around 500hp with the 8.2 deck then you definitely need to stay away from a stock block. You could go with something 351 based (393, 408..etc) and easily hit your goals, and still have some room for growth.
|
I will definetely agree with this if staying with a pushrod motor is in the plan.
|
|
|
04-01-2013, 12:22 PM
|
#10
|
Supporting Member
Join Date: Jun 2012
Age: 40
Posts: 915
|
I'd like to stay NA with the possibility of boost later on. I know there are always gonna be extra costs, I'm just trying to budget for the motor itself right now, doing a 302 swap is more practical. But I know in the long run, a coyote or termi swap would be incredible.
I think since this is my first ever ground up build, I'll stick to a 302 swap. What are my options as for as a block are concerened, should i go short block or long block?
|
|
|
04-01-2013, 12:45 PM
|
#11
|
I> /\/\
Join Date: Jun 2012
Location: A fender ahead of BlownAltered
Posts: 7,562
|
Originally Posted by OG Fox
I'd like to stay NA with the possibility of boost later on. I know there are always gonna be extra costs, I'm just trying to budget for the motor itself right now, doing a 302 swap is more practical. But I know in the long run, a coyote or termi swap would be incredible.
I think since this is my first ever ground up build, I'll stick to a 302 swap. What are my options as for as a block are concerened, should i go short block or long block?
|
A4 or a Sportsman block etc. Stay away from factory production type blocks. There is no truth to that factory "mexican" block nonsense about them being stronger. It will still split down the center like a regular block.
There are many engine builders out there still for Foxes. Just be sure to use a good block, forged internals etc. Keep in mind later that you are thinking about boosting it, so you will need to choose heads and a cam that will work with that later so you don't have to buy them twice.
|
|
|
04-01-2013, 01:00 PM
|
#12
|
I have a small penis
Join Date: Nov 2012
Location: Making Steve my bitch since 2003
Age: 44
Posts: 1,465
|
Originally Posted by Steve
A4 or a Sportsman block etc. Stay away from factory production type blocks. There is no truth to that factory "mexican" block nonsense about them being stronger. It will still split down the center like a regular block.
There are many engine builders out there still for Foxes. Just be sure to use a good block, forged internals etc. Keep in mind later that you are thinking about boosting it, so you will need to choose heads and a cam that will work with that later so you don't have to buy them twice.
|
X2 a good dart block with forged internals. Check out www.fordstrokers.com, they do long blocks and will build it for what you want along with the cam. There are a few guys on dfwmustangs running motors from that builder.
|
|
|
04-01-2013, 01:18 PM
|
#13
|
Senior Member
Join Date: Jun 2012
Location: Keller
Age: 61
Posts: 1,006
|
As mentioned, the factory block is the weak link and it's hit or miss on when, or even if it will break. I know cars making 400 hp that split the block in a month, and I know several cars making 550-600 that have been running for years.
Best bet is to start with good stuff. And if you've never put an engine together, might as well start with a crate motor. Look at FRPP, they have all sorts of power levels available. Check out Craft as well. You're going to be over you $5k limit pretty quickly, no matter which way you go, so might as well leave the assembly to the pros.
__________________
|
|
|
04-01-2013, 01:32 PM
|
#14
|
Senior Member
Join Date: Sep 2012
Location: Saginaw
Age: 38
Posts: 903
|
For the price I'd go with a 351w based motor and a D block (very cheap). Now do you want something very streetable or a 500+hp N/A big cam weekend toy. I'm partial to the sound of a big cam but for driveability you could easily go with a more mild build and a supercharger.
|
|
|
04-01-2013, 01:45 PM
|
#15
|
Supporting Member
Join Date: Jun 2012
Age: 40
Posts: 915
|
Originally Posted by Luke
For the price I'd go with a 351w based motor and a D block (very cheap). Now do you want something very streetable or a 500+hp N/A big cam weekend toy. I'm partial to the sound of a big cam but for driveability you could easily go with a more mild build and a supercharger.
|
something streetable, but yeah i love big cams too. I wanna be able to cruise around town.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|