View Single Post
Old 05-20-2014, 01:16 PM   #1
El_Tortuga
Senior Member
 
El_Tortuga's Avatar
 
Join Date: Apr 2013
Location: Tejas
Posts: 356
Default Who has installed an oil pressure gauge on their Coyote?

I installed the Laguna Seca pod with analog oil pressure, oil temp, and voltage. All seem to be working, but the oil pressure is driving me crazy. It runs really high, like anything over 1.5-2K is 90-100 psi. Even when warm, it still shows 35 psi at idle, and as soon as you tip the throttle, it gets up immediately.

Factory manual states 10-15 psi at idle and 30-40 psi at 2000 rpm (fully warmed). Better too much than too little, but I'm struggling with the track pack 5w50 oilhaving that much impact.

I was up until 1130 checking and rechecking my install and running comparison tests, swapping senders and bench testing them, and checking the gauge itself. All appear to be in order, so if your numbers don't compare, I may need to check with a mechanical gauge and/or remote mount the sender if it's getting some weird effect from the alternator or steering assist.


__________________
2014 GT Track Pack (300A) Black/Black, Recaros, Eibach Pro-kit, Koni adj (yellows), MM camber plates, Whiteline PHB & bracket, Whiteline adj rear sway,Hawk HP+, J+M SS lines,FRPP brake ducts, GT500 AB, 275/35/18 BFG Rivals on 18x10x43 D-force LTWs, Tint and blackout.
El_Tortuga is offline   Reply With Quote