Dallas Fort Worth 5.0 Mustang Club
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Dallas Fort Worth 5.0 Mustang Club (http://www.dfw50s.com/index.php)
-   Vorshlag Motorsports (http://www.dfw50s.com/forumdisplay.php?f=53)
-   -   Vorshlag/Whiteline MT-82 Bushing (http://www.dfw50s.com/showthread.php?t=2545)

Midnight11 08-26-2013 08:19 PM
Vorshlag/Whiteline MT-82 Bushing
 
I want to thank Terry Fair again for showing be around the shop again! Look forward to doing events there soon!

Onto the whiteline trans bushing. For 34 bucks with tax, it is definitely worth it!. Takes less than 5 minutes to install and you can tell the difference. I have the MGW shifter and could tell the shifts are more "effortless" going into gear. Did one pull and didn't get locked out of 5th at 120! Overall, I definitely recommend the piece!!!


http://i560.photobucket.com/albums/s...8/IMG_2673.jpg
http://i560.photobucket.com/albums/s...8/IMG_2674.jpg
http://i560.photobucket.com/albums/s...8/IMG_2676.jpg
http://i560.photobucket.com/albums/s...8/IMG_2677.jpg
http://i560.photobucket.com/albums/s...8/IMG_2678.jpg
http://i560.photobucket.com/albums/s...8/IMG_2679.jpg

Dark Pony 08-26-2013 08:46 PM
Looking forward to getting mine!

CMORENO302 08-26-2013 11:05 PM
Nice.

JPC 08-26-2013 11:06 PM
got mine today
going on my Boss ASAP

46Tbird 08-27-2013 02:20 PM
Do you have to drop the crossmember to install? Not a big deal obviously, just curious.

DirtyD 08-27-2013 02:44 PM
Quote:
Originally Posted by 46Tbird (Post 47235)
Do you have to drop the crossmember to install? Not a big deal obviously, just curious.
Drop the crossbrace, but the crossmember itself can stay connected, just support the trans when you do so.

Rebelracer568 08-28-2013 01:27 PM
Ordered mine last night sadly there on back order. Hopefully get it soon

JPC 08-29-2013 01:40 AM
got my installed today just in time for DFW 6pm traffiic....no fun time
...going to test tomorrow :-)

JPC 08-31-2013 10:09 AM
DFW Boss owners, my bushing is in and it's a great
I'll be at the Boss GTG today, Sat 8-31 @ 11am
Come by should you want to feel the difference
.....thanks Terry & Vorshlag for getting these bushings

https://www.facebook.com/events/603446483039836/

Come join us for BOSS Mustang Owners Association Meet & Greet.

Bring your BOSS out and enjoy some BBQ, and meet other BOSS owners that share the same passion for Ford’s racing legend.

When: Saturday, August 31st 2013
Time: 11:30 AM
Where: Pappas Bar-B-Q
2231 W. Northwest Hwy. (NW Hwy at I-35)
Dallas, TX 75220

downtime! 08-31-2013 11:12 AM
I ordered mine last night as well, with my bad shoulder I can use all the help I can get until we do the 4R swap!

Dan12GT 09-28-2013 06:18 PM
New bushings shipment expected soon? I have mine ordered as well :)

CMORENO302 09-29-2013 02:48 AM
Can we pre-order?

Rebelracer568 09-29-2013 09:45 PM
Ordered mine like 4 weeks ago. Hope they come in soon.

downtime! 09-29-2013 10:26 PM
Mine's been sitting on the desk for a week now. Every other person I've talked to that has installed it has said it didn't do a damn thing for the shifting problems. Not sure if I'm going to mess with it or not.

JDMLOL 09-30-2013 12:09 AM
I dont think there is a shifter, bushing or mount out there that will fix these shitbox getrags. Mine is in the shop with just under 9k for a crunchy second gear.

DirtyD 09-30-2013 12:51 AM
Still waiting on mine as well.

re-rx7 09-30-2013 12:47 PM
Quote:
Originally Posted by JDMLOL (Post 51793)
I dont think there is a shifter, bushing or mount out there that will fix these shitbox getrags. Mine is in the shop with just under 9k for a crunchy second gear.
Im thinking maybe it could be Motor mounts? Lots of movement up front will effect the trans as well. That being said mine has been whining so its going in soon.

Red Devil 09-30-2013 10:05 PM
Got one ordered today cause I had bonus bucks at cj pony expiring, hope its worth my bucks lol

Dan12GT 10-02-2013 02:30 PM
Quote:
Originally Posted by re-rx7 (Post 51860)
Im thinking maybe it could be Motor mounts? Lots of movement up front will effect the trans as well. That being said mine has been whining so its going in soon.
I've heard that helps.

DirtyD 10-09-2013 12:25 PM
Been over a month since I placed my order and was told they had a new shipment coming.

Vorshlag, do y'all have an ETA on when you expect the next shipment to arrive? Is Whiteline that far behind with demand that the back log is this deep?

I emailed with no response the other day...

BERT 10-09-2013 12:58 PM
So what does this thing actually do? From the pics I can't tell. If it supposed to help with the tranny torqueing over, I thought that's what the shifter bracket was for? Am I wrong?

DirtyD 10-09-2013 01:21 PM
Quote:
Originally Posted by BERT (Post 52855)
So what does this thing actually do? From the pics I can't tell. If it supposed to help with the tranny torqueing over, I thought that's what the shifter bracket was for? Am I wrong?
Stiffens the trans mount to further prevent the torsional and lateral deflection of the entire motor/trans relative to the shifter, which is rigidly "connected" to the body, thanks to the shifter bracket.

BERT 10-09-2013 01:53 PM
Quote:
Originally Posted by DirtyD (Post 52856)
Stiffens the trans mount to further prevent the torsional and lateral deflection of the entire motor/trans relative to the shifter, which is rigidly "connected" to the body, thanks to the shifter bracket.


I see. Wonder what Ford was thinking when it came to this?

DirtyD 10-09-2013 02:27 PM
Quote:
Originally Posted by BERT (Post 52857)
I see. Wonder what Ford was thinking when it came to this?
Just the remote mount shifter design of the Getrag, as well as the tremec tr6060. remote mount shifter is just a bad design.

Dan12GT 10-10-2013 10:28 AM
Ford wasn't thinking much I don't think. They skimped on the tranny big time. I wouldn't be surprised they have an entirely different tranny in the 15s and admit to the mt-82 being subpar.

DirtyD 10-10-2013 10:37 AM
Quote:
Originally Posted by Dan12GT (Post 52923)
Ford wasn't thinking much I don't think. They skimped on the tranny big time. I wouldn't be surprised they have an entirely different tranny in the 15s and admit to the mt-82 being subpar.
I don't really think you will see them change trans....unfortunately.

If they do, then they did a damn good job keeping that under wraps

modernbeat 10-10-2013 04:48 PM
Quote:
Originally Posted by DirtyD (Post 52850)
Been over a month since I placed my order and was told they had a new shipment coming.

Vorshlag, do y'all have an ETA on when you expect the next shipment to arrive? Is Whiteline that far behind with demand that the back log is this deep?
As far as we can tell, yes, Whiteline's backlog IS that deep. We've been told they are on their way, but I suspect they are in a container ship, not airmail.

Quote:
Originally Posted by BERT (Post 52855)
So what does this thing actually do? From the pics I can't tell. If it supposed to help with the tranny torqueing over, I thought that's what the shifter bracket was for? Am I wrong?
This bushing is an insert that keeps the stock transmission mount bushing from collapsing and allowing the transmission to twist over to one side under load. When twisted, the body mounted shifter is no longer in line with the transmission, causing missed shifts, or blocked shifts.

BERT 10-10-2013 04:52 PM
Quote:
Originally Posted by modernbeat (Post 52974)
As far as we can tell, yes, Whiteline's backlog IS that deep. We've been told they are on their way, but I suspect they are in a container ship, not airmail.



This bushing is an insert that keeps the stock transmission mount bushing from collapsing and allowing the transmission to twist over to one side under load. When twisted, the body mounted shifter is no longer in line with the transmission, causing missed shifts, or blocked shifts.


Ah, thanks for answering. It's kind of aggravating that Ford went away from the shifter being inside the tail of the transmission

DirtyD 10-10-2013 04:58 PM
Quote:
Originally Posted by modernbeat (Post 52974)
As far as we can tell, yes, Whiteline's backlog IS that deep. We've been told they are on their way, but I suspect they are in a container ship, not airmail.



This bushing is an insert that keeps the stock transmission mount bushing from collapsing and allowing the transmission to twist over to one side under load. When twisted, the body mounted shifter is no longer in line with the transmission, causing missed shifts, or blocked shifts.
I talked with Terry on Facebook and he said that it took them 3 months to even get the first shipment....that's sad...

I can understand that container ships are the cheap effective route to keep cost low, but I honestly wouldn't mind paying a tad more to airmail it. LOL

They aren't really that heavy either.

modernbeat 10-10-2013 06:03 PM
Quote:
Originally Posted by DirtyD (Post 52979)
I talked with Terry on Facebook and he said that it took them 3 months to even get the first shipment....that's sad...

I can understand that container ships are the cheap effective route to keep cost low, but I honestly wouldn't mind paying a tad more to airmail it. LOL

They aren't really that heavy either.
I can understand that too, but I imagine it's not by itself. Whiteline doesn't just sell small bushings. The other parts we use from them on S197s, like the Watts link and swaybars are large, heavy, bulky packages that I definitely do NOT want to pay double shipping for.

DirtyD 10-10-2013 07:01 PM
Quote:
Originally Posted by modernbeat (Post 52989)
I can understand that too, but I imagine it's not by itself. Whiteline doesn't just sell small bushings. The other parts we use from them on S197s, like the Watts link and swaybars are large, heavy, bulky packages that I definitely do NOT want to pay double shipping for.
True.

Mrjeremyt 10-14-2013 07:16 PM
So has anyone Received theirs yet?? I'm kinda hesitant to order it...

modernbeat 10-14-2013 10:25 PM
No, since the first batch immediately sold out there have not been any imported. We're first on the list for the next batch and are still waiting.

Mrjeremyt 10-15-2013 12:44 PM
Quote:
Originally Posted by modernbeat (Post 53374)
No, since the first batch immediately sold out there have not been any imported. We're first on the list for the next batch and are still waiting.
Think you will be getting enough this go around? lol. I'll probably order one this week, and hope I get it when this shipment comes in.

modernbeat 10-15-2013 03:48 PM
Well, maybe we will have enough.

Last time we only had about 20 pre-sold and 20 people that were interested, but had not committed. We still sold out in two days.

So far we have about 30 pre-sold and about 20 people that are interested in this next batch.

brembo12 10-21-2013 10:53 AM
Quote:
Originally Posted by modernbeat (Post 53429)
Well, maybe we will have enough.

Last time we only had about 20 pre-sold and 20 people that were interested, but had not committed. We still sold out in two days.

So far we have about 30 pre-sold and about 20 people that are interested in this next batch.
put me on the list......

Rebelracer568 10-22-2013 08:54 AM
Quote:
Originally Posted by modernbeat (Post 53429)
Well, maybe we will have enough.

Last time we only had about 20 pre-sold and 20 people that were interested, but had not committed. We still sold out in two days.

So far we have about 30 pre-sold and about 20 people that are interested in this next batch.
When next shipment I paid like 2 months ago. Havent heard anything.

DirtyD 10-22-2013 09:13 AM
Quote:
Originally Posted by Rebelracer568 (Post 54018)
When next shipment I paid like 2 months ago. Havent heard anything.
When Terry talked to Whiteline back when he placed the 2nd order, they said about 90 days...

Rebelracer568 10-22-2013 11:15 AM
That works I just havent heard anything since it was ordered. Not in big hurry anyways lol

DirtyD 10-28-2013 05:01 PM
Got my order update today! :grd::party33:

Vorhslag posted on Facebook they got a partial shipment of the bushing today, so hopefully everyone here had theirs fulfilled!


All times are GMT -4. The time now is 04:38 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.