Official Dyno Tuned
 

What up peeps,

I got my car dyno tuned today. It is amazing the difference in the car now with how it drove before. The car went 526.8 STD HP and 454.6 STD TQ. This was at about 4:30 today so around 90 degrees and over 70% humidity. I was fairly impressed with the numbers considering the Temp and Humidity. I am also running the stock pulley and have LT's so I'm probably at 6 to 6.5 lb's of boost

I know several people like the Roush TVS kits and always wonder how the Magnuson compares to it. My car pretty much has what a stage 1 Roush kit would and puts down about the same if not more HP than the Roush TVS would. I did a little looking and found some numbers that JDM put down which showed 475 RWHP, not sure if that's STD or SAE. I am also not sure of their Altitude/Temp/Humidity numbers. They also show that the stage one is around 7-8 lb's of boost.

I will be posting a pic of the dyno sheet here shortly. Hopefully this helps those of you that have been looking at TVS kits. Please also note that the Magnuson S/C kits do not require you to do any cutting on the block which I believe the Roush kits do. Let me know what you guys think.

http://i1143.photobucket.com/albums/...ps12eaab97.jpg

me want to race!

Nice, I wanna see what it will make at 16lbs.

nice numbers man.

Nice!

very nice scott!

Just enough to get in trouble with..

This is true, will be interesting to see how I do the next time I take her to the track, have a feeling i will be fighting oversteer like crazy. Throttle response is borderline retarded now.

What were the numbers before the boost?

Don't have numbers from before, S/C was on the car at 600 miles. Car normally would have been dyno tuned as it was built, but with SEMA there isn't always a lot of time to get everything done. It's a godsend just to have a car that ran and drove there haha.

Re: Official Dyno Tuned
 

Very nice! I might just have to go this route. I really like how you don't have to cut anything for the install. What is the price on the kit?

Thanks Ryan, give Mike a call (972) 542-0255. He will let you know what he can do for you on the Maggie kit.

Of all the kits, it's the easiest to install. The base Maggie kits are around $5500 bucks, but it comes with everything you need except a decent intake which they are still trying to develop. They struggle to make decent power and really need to be pullied. They could also benefit from a larger intercooler because the one it comes with is really small, but it was designed to just slide in with no mods/cutting needed. Several owners have made comments about heatsoak issues due to the size of the intercooler. BUT, if you're only looking for fun moderate power, the Maggie will get it done.

I think the Maggie is a solid alternative for someone wanting a PD blower but cant drop $7k on a Roush setup. The upside of the Roush setup is that it's a proven blower with easy support (to where the Maggie has almost none outside of the Vette community) The Roush also has proven reliability by Ford.

I've put a lot of time into researching all the blowers available for these cars. I talked to Travis who is the owner of SVTP who has a Maggie on his GT. He's been helping Magnuson develop a CAI for the the blower, but it's been very slow going. They've been working on that thing for over a year now. Travis made a frankenstein CAI for it out of spare parts and it picked up some really good power showing the stock intake really chokes the blower.

Steve, this isn't 100% correct which is why I posted some info about the Roush stage 1 kit. To say that Maggie struggles to make decent power is bullshit. Sure if you take the stage 2 or 3 kits with CAI's and pullies on them they make more power, but it would be no different than if you do a CAI and pulley on the Maggie. Also to say that Maggie is unproven except with Corvette is inaccurate as well, especially since Magnuson has been around way longer that most others out there. The only reason they are not known on Mustangs as much is because of how popular the Kenny Bell's and Whipples are from the Termi days. I hope you know that when you look at the kits on the online stores that those are not RWHP numbers. For example, my Maggie kit is making around 600 crank which is about the same as the Roush 575 Kit.

Yep sounds like me! I just want to be right at 600hp and I will be more than happy and it sounds like this kit will get me to that goal. Plus I have never installed something this large before so the ease of install is huge plus for me.