Dallas Fort Worth 5.0 Mustang Club - Installed STR.T/GT500 mounts/H&R Race

Page 2 of 2

Show 40 post(s) from this thread on one page

Dallas Fort Worth 5.0 Mustang Club (http://www.dfw50s.com/index.php)

- Suspension (http://www.dfw50s.com/forumdisplay.php?f=32)

- - Installed STR.T/GT500 mounts/H&R Race (http://www.dfw50s.com/showthread.php?t=2749)

BV600

09-24-2013 07:17 PM

Knock, No rattles or squeak....lol

Dan12GT

09-27-2013 01:24 PM

I am reallly really considering these shocks/struts as I have just about had it with my stock ones. Yes I know, should have upgraded them when I first did the springs. Considering I don't drag my car much I feel these would be a great middle ground shock/strut for me as I am just trying to get some ride quality back.

BV600

09-27-2013 01:37 PM

Ive only got maybe 20miles on them. So far I really enjoy the quality cant throw into any corners though the stock 235s give quick. I will give a good review with some more miles

El_Tortuga

09-27-2013 01:52 PM

Quote:

Originally Posted by BV600 (Post 51277)

Anyone have an idea of what to check? See below

Under nose dive braking and some bumps I get some slight noise, can feel it more than here it. I torqued everything to spec, unless the Nut on the actual struts isn't all the way tight. Used a 200 ft lb electric tq wrench and went back and checked the tq after.

I had the same issue with adjustable PHB. It had loosened up. A little loktite and retightened sorted that out.

re-rx7

10-04-2013 10:42 AM

Little too low for my taste. I will probally go with the Ford Racing P springs or Eibach Pros.

All times are GMT -4. The time now is 08:39 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page