Dallas Fort Worth 5.0 Mustang Club

Dallas Fort Worth 5.0 Mustang Club (http://www.dfw50s.com/index.php)
-   General Discussions (http://www.dfw50s.com/forumdisplay.php?f=10)
-   -   Fun times ahead for the Mach (http://www.dfw50s.com/showthread.php?t=1286)

brtnstrns 03-10-2013 04:52 PM

Fun times ahead for the Mach
 
When I picked up the Mach in October, I remember test driving it and the awesome feeling of spinning the tires in 2nd and 3rd gear. Well since I swapped in the IRS, I had to go from 4.10s back down to 3.55s. Well, this makes the car a whole lot less fun under 2500 RPMs. So, I'm looking forward to this:

http://i.imgur.com/sDPVRad.jpg?1

4.10s, installation kit, and ford racing upgraded cover. Now the IRS will truly be bulletproof (also has full FTBR kit - fingers crossed!) and if the car is really pushing over 390 RWPH like the previous owners dyno graph showed, it's gonna be a hell of a good time. Hopefully have these all installed in the next month or two (sucks I gotta take the pumpkin out again, oh well), then 4 wheel alignment, then hopefully a few months after that save up to get it tuned perfectly. So excited :head3:

03MachMe 03-10-2013 05:01 PM

I had 4.10s in my mach and loved them

Grandpa 03-10-2013 06:22 PM

The weezy 4.6 needs 4.10's to get it moving. lol.

brtnstrns 03-10-2013 06:46 PM

Quote:

Originally Posted by Steve (Post 21786)
The weezy 4.6 needs 4.10's to get it moving. lol.

Hey now, you keep forgetting...its a 5.0 (stroker) Bah hah!

Grandpa 03-10-2013 06:56 PM

Quote:

Originally Posted by brtnstrns (Post 21790)
Hey now, you keep forgetting...its a 5.0 (stroker) Bah hah!

:happy175:

MidWest281 03-10-2013 09:28 PM

yup...that's reeeeeel nice Clark.

your car is freakin clean man, what do you have done to it? is it really a stroked 4.6?

brtnstrns 03-10-2013 10:26 PM

Quote:

Originally Posted by MidWest281 (Post 21807)
yup...that's reeeeeel nice Clark.

your car is freakin clean man, what do you have done to it? is it really a stroked 4.6?

I can't take any credit for it since the previous owner had the engine work done on it (thank goodness cause that saves me a ton of money). But its a 5.0 stroker generally built by HPP (originally started as an MMR motor but didn't last long apparently). Ported intake and head work, comp cams, intake spacer, mac LTs, electric water pump, cobra tank, upgraded fuel rails and injectors etc etc.

Emwun Garand 03-11-2013 12:21 AM

If it has the FULL FTBR kit, that diff cover won't fit without some milling.

http://www.svtperformance.com/forums...rs-thread.html

MidWest281 03-11-2013 12:52 AM

Quote:

Originally Posted by brtnstrns (Post 21817)
I can't take any credit for it since the previous owner had the engine work done on it (thank goodness cause that saves me a ton of money). But its a 5.0 stroker generally built by HPP (originally started as an MMR motor but didn't last long apparently). Ported intake and head work, comp cams, intake spacer, mac LTs, electric water pump, cobra tank, upgraded fuel rails and injectors etc etc.

dang. nice. that must be a pretty wicked ride. got any sound clips of it?

brtnstrns 03-11-2013 08:16 AM

Quote:

Originally Posted by Emwun Garand (Post 21829)
If it has the FULL FTBR kit, that diff cover won't fit without some milling.

http://www.svtperformance.com/forums...rs-thread.html

Well, sorry, it's got the full kit minus the upgraded rear diff mount - but the other "full" kit comes with a bushing to replace the rear diff bushing. I don't seem to have any driveline vibration so the replacement mount isn't really necessary.

brtnstrns 03-11-2013 08:23 AM

Quote:

Originally Posted by MidWest281 (Post 21834)
dang. nice. that must be a pretty wicked ride. got any sound clips of it?

This is from when I first got everything hooked back up. It was late at night and in my apartment garage so I didn't get on it much at all, but it still sounds pretty sweet. Its MAC LTs, Lethal Performance Catted X-pipe, and Steeda catback


MidWest281 03-11-2013 11:11 AM

Quote:

Originally Posted by brtnstrns (Post 21846)
This is from when I first got everything hooked back up. It was late at night and in my apartment garage so I didn't get on it much at all, but it still sounds pretty sweet. Its MAC LTs, Lethal Performance Catted X-pipe, and Steeda catback


nice. sounds awesome. I am a fan.

brtnstrns 03-11-2013 11:44 AM

Quote:

Originally Posted by MidWest281 (Post 21863)
nice. sounds awesome. I am a fan.

Why thank you:rockit:


All times are GMT -4. The time now is 08:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.