Dallas Fort Worth 5.0 Mustang Club

Dallas Fort Worth 5.0 Mustang Club (http://www.dfw50s.com/index.php)
-   For Sale (http://www.dfw50s.com/forumdisplay.php?f=23)
-   -   Boss H-Pipe with Side Pipes (http://www.dfw50s.com/showthread.php?t=4514)

NAVAG 08-10-2014 11:18 AM

Boss H-Pipe with Side Pipes
 
I'm selling my Ford Racing Boss 302 H-Pipe with side Pipes because I switching to a different exhaust set up. They have 20,000 miles on them and are in great condition.

They come with spacers, restrictor plates 1/4" hole in the center, and some blanks. All hardware is included.

I removed the clamps that were tack welded on by Ford Racing so I could turn them upside down during the install. When you remove your stock H-Pipe you'll appreciate why I did that.

I'm off Wednesday so I'll pull it off and take pictures

$450

NAVAG 08-11-2014 12:10 PM

Took the H-Pipe and Side Pipes off this morning. I have to go to work so I'll post some pics tomorrow morning.

MontanaBentley 08-11-2014 11:03 PM

okay so how hard would it be to put these on a 5.0.

DirtyD 08-12-2014 01:00 AM

Quote:

Originally Posted by MontanaBentley (Post 74271)
okay so how hard would it be to put these on a 5.0.


Not hard. A lift would be preferred, but I'm sure with y'all enough jack stands it can be done.

NAVAG 08-12-2014 01:35 AM

Took about an hour to do the swap this morning with jack stands. About two hours when I first installed them...and I'm old and fat.

NAVAG 08-12-2014 12:40 PM

https://lh6.googleusercontent.com/-A...104259_576.jpg
H-Pipe, Side Pipes, Gaskets, Spacers, Restrictor Plates, Clamps and Hardware

https://lh4.googleusercontent.com/-0...104520_015.jpg
Side Pipe Top

https://lh4.googleusercontent.com/-P...104542_012.jpg
Side Pipe Outlet

https://lh4.googleusercontent.com/-i...104624_791.jpg
Scratches on one from when I hit a dip going too fast

https://lh5.googleusercontent.com/-I...104645_854.jpg
Mid Pipe Rear and Flanges

https://lh6.googleusercontent.com/-i...104708_645.jpg
Mid Pipe Front

https://lh3.googleusercontent.com/-p...104453_839.jpg
https://lh3.googleusercontent.com/-_...104424_174.jpg
https://lh4.googleusercontent.com/-v...104332_554.jpg

Back in original box
https://lh6.googleusercontent.com/-7...105550_404.jpg
https://lh4.googleusercontent.com/-K...105913_102.jpg

NAVAG 08-12-2014 12:51 PM

https://lh3.googleusercontent.com/-L...100222_637.jpg

This is how far it sits under the car for those that have asked and are worried about bottoming out. I have a little rash on one of them from going through a dip in the road too fast. My car is lowered more than 1.5" now that the springs have fully settled so dips and speed bumps scare the hell out of me anyway. But that was my fault for not paying attention. The resonators on the Over-Axle Pipes took most of the scrapes.

NAVAG 08-12-2014 12:56 PM

New Sale Price!!!

Because they have a few more cosmetic defects that I thought now that I have cleaned them up. I'll drop the price to $400

NAVAG 08-14-2014 06:44 PM

Sale pending...

NAVAG 08-15-2014 06:14 PM

Sold!


All times are GMT -4. The time now is 11:23 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.