Dallas Fort Worth 5.0 Mustang Club

Dallas Fort Worth 5.0 Mustang Club (http://www.dfw50s.com/index.php)
-   Performance (http://www.dfw50s.com/forumdisplay.php?f=30)
-   -   Bone Stock Dyno Charts (http://www.dfw50s.com/showthread.php?t=2098)

Dominic Toretto 06-28-2013 11:05 AM

Bone Stock Dyno Charts
 
Anyone have any bone stock dyno charts? Wanting to see what I should be at. Only mod I have is an axle back which I don't believe would do anything really. I have an auto as well.

-Alex

DirtyD 06-28-2013 11:13 AM

There are some around here somewhere.

Oxford14Stang 06-28-2013 11:15 AM

Quote:

Originally Posted by Dominic Toretto (Post 37127)
Anyone have any bone stock dyno charts? Wanting to see what I should be at. Only mod I have is an axle back which I don't believe would do anything really. I have an auto as well.

-Alex

My 2014 5.0 6 speed dynoed out 358hp, 338tq(std) with just axle back and 3.55 gears which shouldnt affect anything. Was very disappointed in my numbers but the humidity was 70% which everyone including the guy who dynoed the car(at GearHeads) said is what killed my numbers. But as what was mentioned to me by some older vets in here. HP doesn't matter. Its how fast you can get what you have down the track. :) let me know what you dyno

DirtyD 06-28-2013 11:16 AM

Here is Don's car.

http://www.dfw50s.com/showthread.php?p=6675#post6675

DirtyD 06-28-2013 11:17 AM

My M6 car with 3.55s, Brembo wheels and tires (255/40/19) with GT500 mufflers only out down 378/365 SAE last Sept.

Zeek 06-28-2013 11:46 AM

I was same as DirtyD +/-2hp/tq manual 3.55s roush A/B stock base wheels n tires

46Tbird 06-28-2013 12:08 PM

2012 GT, M6, 3.73s, 20" cast wheels and drag radials
390/371 STD

If you use the correction factor to SAE (cf=.95456) then that works out to 372/354.

http://i13.photobucket.com/albums/a2...T/SANY0056.jpg

Dominic Toretto 06-28-2013 12:25 PM

Do you guys recall what dyno machines you are using? I heard Mustang dynos usually give a little more, ironically.

-Alex

Rebelracer568 06-28-2013 12:44 PM

Gear heads uses a dyno jet. I know speedtek use dyno jets also

Courtesy Flush 06-28-2013 12:48 PM

Quote:

Originally Posted by Dominic Toretto (Post 37163)
Do you guys recall what dyno machines you are using? I heard Mustang dynos usually give a little more, ironically.

-Alex

Mustang dyno is usally a heartbreaker.

DirtyD 06-28-2013 01:11 PM

Pretty sure TS uses Dynojet as well

PLASMAN 06-28-2013 01:58 PM

Quote:

Originally Posted by DirtyD (Post 37132)

I'll look when I get home I think I was 359/348 bone stock auto- since Steeda CAI, Jeggs ct deletes, GT500AB and new VMP tune 394/388 dynojet

rriddle3 06-28-2013 02:07 PM

Quote:

Originally Posted by Dominic Toretto (Post 37127)
Anyone have any bone stock dyno charts? Wanting to see what I should be at. Only mod I have is an axle back which I don't believe would do anything really. I have an auto as well.

-Alex

Stock 2012 GT auto should put down 350-360 rwhp.

Quote:

Originally Posted by DirtyD (Post 37200)
Pretty sure TS uses Dynojet as well

True Street uses a DynoJet.

Blackout 06-28-2013 02:30 PM

Dynoed at 376 on 89oct with really really bad weather...28% humidity that day

Dominic Toretto 06-28-2013 02:36 PM

Quote:

Originally Posted by Blackout (Post 37238)
Dynoed at 376 on 89oct with really really bad weather...28% humidity that day

Why are you dynoing with 89 octane? Why not go with 93? That's what I use only.

Is everyone using 89 octane?

-Alex

Doug1227 06-28-2013 02:40 PM

All you guys spewing M6 numbers aren't helping the OP. There's a BIG difference... like said above, an A6 is going to be around 355rwhp or so.... my car with a tune and GT500 A/B only made 375rwhp.....BUT ran 12.3's or so....don't read too much into the dyno numbers....get it to the track!

DirtyD 06-28-2013 02:45 PM

Quote:

Originally Posted by Dominic Toretto (Post 37241)
Why are you dynoing with 89 octane? Why not go with 93? That's what I use only.

Is everyone using 89 octane?

-Alex

His dad filled it up the day before with 89 instead of 93.

Luke 06-28-2013 02:55 PM

Quote:

Originally Posted by Rebelracer568 (Post 37179)
Gear heads uses a dyno jet. I know speedtek use dyno jets also

Speedtek?! lol Are they still around? I haven't heard anyone mention them in a LONG time.

DirtyD 06-28-2013 02:58 PM

Quote:

Originally Posted by Luke (Post 37248)
Speedtek?! lol Are they still around? I haven't heard anyone mention them in a LONG time.

I drive by them every day and there are cars out there. Mostly the same ones, but they are open. LOL

Dominic Toretto 06-28-2013 03:02 PM

Quote:

Originally Posted by Doug1227 (Post 37242)
All you guys spewing M6 numbers aren't helping the OP. There's a BIG difference... like said above, an A6 is going to be around 355rwhp or so...

It's okay Doug, thanks. I know there is more drivetrain loss for an auto than through a manual :). I recall seeing a chart on svtperformance I believe, or somewhere of someone showing a dyno and claiming it was an A6 but it was above 370hp stock. So trying to see what the TX guys are getting.

-Alex

46Tbird 06-28-2013 03:23 PM

Quote:

Originally Posted by Luke (Post 37248)
Speedtek?! lol Are they still around? I haven't heard anyone mention them in a LONG time.

Of course they're still around. Doing well, too. They cater to the old guys with GM cars and lots of money. That kind of work is profitable!

Pepperinyoureye 06-28-2013 06:20 PM

Here are my stock runs. 363/351 on 50/50 mix of 87 and 93 if it matters.



Oxford14Stang 06-28-2013 07:00 PM

Quote:

Originally Posted by Dominic Toretto (Post 37163)
Do you guys recall what dyno machines you are using? I heard Mustang dynos usually give a little more, ironically.

-Alex

Mine was Dynojet, - mustang dynos read lower.

Quote:

Originally Posted by Blackout (Post 37238)
Dynoed at 376 on 89oct with really really bad weather...28% humidity that day

Think that's really really bad , my dyno day was 70% humidity. Lol *_^

Quote:

Originally Posted by Dominic Toretto (Post 37241)
Why are you dynoing with 89 octane? Why not go with 93? That's what I use only.

Is everyone using 89 octane?

-Alex

All my tunes are 93, wouldn't use anything else. (Maybe e85 lol) but even your owners manual will tell you to get max. performance use a min of 91

fordplay 06-30-2013 08:08 AM

Mustang dyno's yeah they shrivel dicks.. you walk in with any other dyno sheet saying 410 HP and the mustang dyno will say 360-380... if its a good day.. I think mine was 378 stock...

re-rx7 06-30-2013 10:41 AM

Quote:

Originally Posted by fordplay (Post 37514)
Mustang dyno's yeah they shrivel dicks.. you walk in with any other dyno sheet saying 410 HP and the mustang dyno will say 360-380... if its a good day.. I think mine was 378 stock...

Very true. I always ask where people dynoed to get an idea of what kind of power they are really making. That being said a dyno is just a tool.:smoke2:

Midnight11 06-30-2013 10:47 AM

made 388hp stock

re-rx7 06-30-2013 11:21 AM

Quote:

Originally Posted by Midnight11 (Post 37523)
made 388hp stock

and still slow. :boxing:

Midnight11 06-30-2013 11:26 AM

Quote:

Originally Posted by re-rx7 (Post 37527)
and still slow. :boxing:

dont you have more bitching to do about your car?

re-rx7 06-30-2013 11:36 AM

No more bitching till my car is out the shop. Whick while its in there will probally still be faster. LOL Speaking of which were you at the coit meet a few weeks back? Left around 11 or so?

Midnight11 06-30-2013 11:59 AM

im sure it is we all know bama cars are super fast. and yea ive been there for the last month or so....

re-rx7 06-30-2013 01:31 PM

I saw you leaving, sounded deep. Yup Zeeks is even pretty quick.:laughing1:

Oxford14Stang 06-30-2013 05:05 PM

Y'all need to run rebelracer if you think your fast :) (putting him on the spot)

Rebelracer568 06-30-2013 05:07 PM

Why would they wanna waste there fuel on my slow turd

Oxford14Stang 06-30-2013 06:30 PM

Oooh now its a "slow turd" I like your new signature after I posted that haha

Rebelracer568 06-30-2013 06:54 PM

Thought it was time to change it lol

Oxford14Stang 06-30-2013 11:05 PM

Hahahaa, I hear you :)

Zeek 06-30-2013 11:16 PM

Lol i'll race any bolt on 5.0 im not skurd!

Rebelracer568 07-01-2013 07:49 AM

Quote:

Originally Posted by Zeek (Post 37607)
Lol i'll race any bolt on 5.0 im not skurd!

Ill play I'm a fully bolted on 5.0

Zeek 07-01-2013 09:45 AM

Well I'm driving to NY tomorrow and I'll be back around the 14th. The Friday after that I'll be at Coit and 190 if ya wanna go!

re-rx7 07-01-2013 09:50 AM

Fuck it im down.


All times are GMT -4. The time now is 12:41 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.