Bone Stock Dyno Charts

[Dominic Toretto]

Anyone have any bone stock dyno charts? Wanting to see what I should be at. Only mod I have is an axle back which I don't believe would do anything really. I have an auto as well.

-Alex

[DirtyD]

There are some around here somewhere.

[Oxford14Stang]

Anyone have any bone stock dyno charts? Wanting to see what I should be at. Only mod I have is an axle back which I don't believe would do anything really. I have an auto as well.

-Alex

My 2014 5.0 6 speed dynoed out 358hp, 338tq(std) with just axle back and 3.55 gears which shouldnt affect anything. Was very disappointed in my numbers but the humidity was 70% which everyone including the guy who dynoed the car(at GearHeads) said is what killed my numbers. But as what was mentioned to me by some older vets in here. HP doesn't matter. Its how fast you can get what you have down the track. :) let me know what you dyno

[DirtyD]

Here is Don's car.

http://www.dfw50s.com/showthread.php?p=6675#post6675

[DirtyD]

My M6 car with 3.55s, Brembo wheels and tires (255/40/19) with GT500 mufflers only out down 378/365 SAE last Sept.

[Zeek]

I was same as DirtyD +/-2hp/tq manual 3.55s roush A/B stock base wheels n tires

[46Tbird]

2012 GT, M6, 3.73s, 20" cast wheels and drag radials
390/371 STD

If you use the correction factor to SAE (cf=.95456) then that works out to 372/354.

http://i13.photobucket.com/albums/a274/46Tbird/2012%20GT/SANY0056.jpg

[Dominic Toretto]

Do you guys recall what dyno machines you are using? I heard Mustang dynos usually give a little more, ironically.

-Alex

[Rebelracer568]

Gear heads uses a dyno jet. I know speedtek use dyno jets also

[Courtesy Flush]

Do you guys recall what dyno machines you are using? I heard Mustang dynos usually give a little more, ironically.

-Alex

Mustang dyno is usally a heartbreaker.

[DirtyD]

Pretty sure TS uses Dynojet as well

[PLASMAN]

Here is Don's car.

http://www.dfw50s.com/showthread.php?p=6675#post6675

I'll look when I get home I think I was 359/348 bone stock auto- since Steeda CAI, Jeggs ct deletes, GT500AB and new VMP tune 394/388 dynojet

[rriddle3]

Anyone have any bone stock dyno charts? Wanting to see what I should be at. Only mod I have is an axle back which I don't believe would do anything really. I have an auto as well.

-Alex
Stock 2012 GT auto should put down 350-360 rwhp.

Pretty sure TS uses Dynojet as well
True Street uses a DynoJet.

[Blackout]

Dynoed at 376 on 89oct with really really bad weather...28% humidity that day

[Dominic Toretto]

Dynoed at 376 on 89oct with really really bad weather...28% humidity that day

Why are you dynoing with 89 octane? Why not go with 93? That's what I use only.

Is everyone using 89 octane?

-Alex

[Doug1227]

All you guys spewing M6 numbers aren't helping the OP. There's a BIG difference... like said above, an A6 is going to be around 355rwhp or so.... my car with a tune and GT500 A/B only made 375rwhp.....BUT ran 12.3's or so....don't read too much into the dyno numbers....get it to the track!

[DirtyD]

Why are you dynoing with 89 octane? Why not go with 93? That's what I use only.

Is everyone using 89 octane?

-Alex
His dad filled it up the day before with 89 instead of 93.

[Luke]

Gear heads uses a dyno jet. I know speedtek use dyno jets also

Speedtek?! lol Are they still around? I haven't heard anyone mention them in a LONG time.

[DirtyD]

Speedtek?! lol Are they still around? I haven't heard anyone mention them in a LONG time.
I drive by them every day and there are cars out there. Mostly the same ones, but they are open. LOL

[Dominic Toretto]

All you guys spewing M6 numbers aren't helping the OP. There's a BIG difference... like said above, an A6 is going to be around 355rwhp or so...

It's okay Doug, thanks. I know there is more drivetrain loss for an auto than through a manual :). I recall seeing a chart on svtperformance I believe, or somewhere of someone showing a dyno and claiming it was an A6 but it was above 370hp stock. So trying to see what the TX guys are getting.

-Alex

[46Tbird]

Speedtek?! lol Are they still around? I haven't heard anyone mention them in a LONG time.

Of course they're still around. Doing well, too. They cater to the old guys with GM cars and lots of money. That kind of work is profitable!

[Pepperinyoureye]

Here are my stock runs. 363/351 on 50/50 mix of 87 and 93 if it matters.


WCxQaKdFzoE

[Oxford14Stang]

Do you guys recall what dyno machines you are using? I heard Mustang dynos usually give a little more, ironically.

-Alex

Mine was Dynojet, - mustang dynos read lower.

Dynoed at 376 on 89oct with really really bad weather...28% humidity that day

Think that's really really bad , my dyno day was 70% humidity. Lol *_^

Why are you dynoing with 89 octane? Why not go with 93? That's what I use only.

Is everyone using 89 octane?

-Alex

All my tunes are 93, wouldn't use anything else. (Maybe e85 lol) but even your owners manual will tell you to get max. performance use a min of 91

[fordplay]

Mustang dyno's yeah they shrivel dicks.. you walk in with any other dyno sheet saying 410 HP and the mustang dyno will say 360-380... if its a good day.. I think mine was 378 stock...

[re-rx7]

Mustang dyno's yeah they shrivel dicks.. you walk in with any other dyno sheet saying 410 HP and the mustang dyno will say 360-380... if its a good day.. I think mine was 378 stock...

Very true. I always ask where people dynoed to get an idea of what kind of power they are really making. That being said a dyno is just a tool.:smoke2:

[Midnight11]

made 388hp stock

[re-rx7]

made 388hp stock

and still slow. :boxing:

[Midnight11]

and still slow. :boxing:

dont you have more bitching to do about your car?

[re-rx7]

No more bitching till my car is out the shop. Whick while its in there will probally still be faster. LOL Speaking of which were you at the coit meet a few weeks back? Left around 11 or so?

[Midnight11]

im sure it is we all know bama cars are super fast. and yea ive been there for the last month or so....

[re-rx7]

I saw you leaving, sounded deep. Yup Zeeks is even pretty quick.:laughing1:

[Oxford14Stang]

Y'all need to run rebelracer if you think your fast :) (putting him on the spot)

[Rebelracer568]

Why would they wanna waste there fuel on my slow turd

[Oxford14Stang]

Oooh now its a "slow turd" I like your new signature after I posted that haha

[Rebelracer568]

Thought it was time to change it lol

[Oxford14Stang]

Hahahaa, I hear you :)

[Zeek]

Lol i'll race any bolt on 5.0 im not skurd!

[Rebelracer568]

Lol i'll race any bolt on 5.0 im not skurd!

Ill play I'm a fully bolted on 5.0

[Zeek]

Well I'm driving to NY tomorrow and I'll be back around the 14th. The Friday after that I'll be at Coit and 190 if ya wanna go!

[re-rx7]

Fuck it im down.

[Pepperinyoureye]

In.

[Oxford14Stang]

Count me in.

[Rebelracer568]

I'm in but I usually prefer drag strip races controlled environment, but heck why not. All in fun :)

[Dominic Toretto]

Haha, so you guys going to Mexico I see? :)

-Alex